17
Insert seatpost into the frame and
set it to your desired seat height.
4.3
Tighten seat clamp
Torx
T
25
4.4
Install cable and cable housing into
your remote. Make sure the cable
has no play.
4.5
For inserting the post, always push the
seatpost. Do not pull the cable to
insert the post.
Make sure the seatpost does not collide
with any kink or rocker mounts of the frame.
Before cutting the cable, check the function.
1. NIVO does not lock properly = Reduce cable tension
2. Remote has free travel = Increase cable tension
Summary of Contents for NIVO 212
