AVFRPS1
Front & Rear Parking System
7
When either the front or rear unit detects an obstruction the display will illuminate and a
beeping will be heard. This beeping can be switched off by briefly pressing the button
on the display.
As the obstruction gets closer the frequency of the beeps will increase and more
segments will be illuminated on the display. The display will also show which side the
object is (left or right) by using that sides corresponding LED’s. Depending on whether
the obstruction is at the front or the rear of the vehicle the corresponding arrow will
illuminate on the display.
The top arrow signifies a front obstruction and the lower one a rear. If an obstruction is
present at both the front and rear of the vehicle then the display will alternate between
the two. The approximate distance to the obstruction will also be shown in the middle
of the display.
If the vehicle speed exceeds the set limit (in speed setting) then the kit will switch off.
You are also not able to manually turn the kit on when above the set speed.
Specification
AVFRPS1 - Front & Rear Parking Sensors
Rated Voltage:
12V DC
Operational voltage:
10-16V DC
Operating Current:
30-280mA
Detection Distance:
0.2-1.5M
Ultrasonic Frequency:
40KHz
Working Temperature:
-30 - +70C
