AVFRPS1
Front & Rear Parking System
2
Introduction
Package Contents
2 x ECU
8 x Sensors
4 x Short Rear Sensor Harnesses
4 x Long Front Sensor Harnesses
2 x Wiring Harness
1 x Switch
1 x Display
Installation
Mounting the Sensors
The sensors should ideally be equally spaced along the bumper. For best results we
recommend that the outer sensors are spaced between 8-13cm from the edge of the
bumper. The sensors should then be spaced between 30-40cm from each other as
shown in the diagram on the next page.
The sensors should be mounted between 55 and 80cm from the ground to avoid false
triggering.
Please pay attention to the lettering on the sensors and fit the according to the diagram
opposite.
Thank you for purchasing the AVFRPS1 Parking System.
All Veba Parking Solutions are designed to improve safety during driving by providing
high quality audible and/or visual feedback of surrounding areas and obstacles in the
vicinity of the vehicle. They also improve vehicle manoeuvring capability by adding
coverage blind spots not normally visible to the driver. Please ensure you read and
understand all aspects of this manual before fitting or using your Veba Parking System.
