LVP40X User Manual
www.videowall.cn
30
Figure 4-26
Click “knob” to select “Yes”, then click “Enter” to reset the factory settings,
the moment the system will remind you
“The device is resetting,
please restart the machine”
, just follow the instruction.
Item 27: “
White Balance Adjustment”
After inputting the analog signal to the video processor of which white
balance has not been calibrated, the picture on the display may appear
some bad phenomena, such as color cast, extreme-darkness. LVP606
can solve the above problems by automatically calibrating white balance
based on the input analog signals (CBS, VGA).
Operating procedures:
Switch to the corresponding analog input signal, enter Item No. 27 after
the processor detects input signals and exports the signals to the display,
press “Enter” to calibrate white balance.
Caution: The white balance of all video processors have been
calibrated using standard signals in the factory, please don’t set this item
unless necessary!