LVP40X User Manual
www.videowall.cn
26
In this item, user can Press “Mode0” “Mode1” “Mode2” to select “Save
mode of current setup”; Press “Out1” “Out2” “Out3” “Out4” to select “DVI
output port for current setup” ; Press “knob” to select “New value” , when
the value you desire appears, Press “Enter” to save the setting, Press
“Step” to select “Step value for number setup” .
As above example shows, Press
“
Mode0”
to select Save mode of
current setup= Mode0;
Press “Out1” to select DVI output port for current setup=Out1, set Output
horizontal width =1728;
Press “Out2” to select DVI output port for current setup=Out2, set Output
horizontal width =1728;
Press “Out3” to select DVI output port for current setup=Out3, set Output
horizontal width =1728;
Press
“
Out4” to select DVI output port for current setup=Out4, set
Output horizontal width =1728;
Item No. 21: “
Output horizontal start
“
Figure 4-21
In this item, user can Press
“
Mode0”
“Mode1”
“Mode2” to select
“Save mode of current setup”;
Press
“
Out1”
“Out2”
“Out3”
“Out4” to select “DVI output port for current setup” ; Press
“
knob” to
select “New value” , when the value you desire appears, Press
“
Enter”
to save the setting, Press
“
Step”
to select
“Step value for number
setup” .
As above example shows, Press
“
Mode0”
to select Save mode of
current setup= Mode0;