LedSync850M User Manual
www.cnledsourcing.com
9
/
31
different input signals.
Seamless switching (
Cut
): while in this mode the message “cut” will
appear in the third line on the LCD screen and the switching effect
between two different input signals will be seamless.
Fade in/Fade out (
Fade
): while in this mode the message
“Fade=1.0S” will appear in the third line on the LCD screen and the
switching effect between two different input signals will be Fade
in/Fade out. The time needed for the switching can be set as 0.5S,
1.0S or 1.5S.
5) Full display / part display (
Bypass
)
The key is used for switching between full display and part display
of VGA/DVI/USB. When the selected input signal is V1, to press the
key won’t change its display status.
Status Description
Full
The display status is full-screen. The output image is
compressed to be fully displayed on LED screen and the
indicator is OFF.
Part
In this mode, only a part of the output image will be
displayed on the LED screen because it is not
compressed and the indicator is ON.
Remark: when the width and height of VGA/DVI input signal is
lower than those of the LED screen (say the out_Hori_width or
out_Vert_height), this function is invalid.
6) USB shortcut keys (rewind, play/pause, fast forward, previous, stop,
next,
knob -, knob +
)
When the selected input signal is USB, press USB three times to
enter Play status and the following message will appear (when play
pictures, there is no reminder like “Volume
＋
/
－
”):
When play videos, 8 shortcut keys are all available (
knob –
and
knob +
are used to adjust volume).
When play pictures, only “play/pause, previous and next” are
Playing
：
向日葵
.MOV
Volume
＋
/
－
Volume
25
