LedSync850M User Manual
www.cnledsourcing.com
18
/
31
information and fully display the image on LED display.
To make sure the gray level of output images is complete, the default
is set as 50.
Find the item No.9 “Version Number”, press “V1” 5 times and then
“↑” to reach the item 11 “Bias”. Turn the knob to adjust the value and
press it to save it.
Item 12: “
VGA Output
”
There are two modes for VGA output: one is “Local” which means
VGA Out will output same signals just like DVI Out, and another one is
USB, which means VGA Out will only output USB signal. The following
is how to do it:
Find the item No.9 “Version Number”, press “V1” 5 times and then
“↑” to reach the item 12 “VGA Output”. Turn the knob to select “open”
and press it to save the setting.
Item 13: “
ByPass Sel
”
“ByPass Sel” offers two selection modes: one is “Local” which
means “Bypass” is realized by the master chip; another one is “USB”,
which means “Bypass” is realized by the USB module.
Find the item No.9 “Version Number”, press “V1” 5 times and then
“↑” to reach the item 13 “ByPass Sel”. Turn the knob to select and
press it to save the setting.
Item 14: “
Device Init
”
Find the item No.9 “Version Number”, press “V1” 5 times and then
“↑” to reach the item 14 “Device Init”. Turn the knob to select “Confirm”,
the processor will be initialized and also remind “please restore”.
VI. Specifications
Inputs
Type/Number
1× Video
1× VGA (RGBHV)
1× DVI (HDMI1.3)
1× USB
Video Standard
PAL/NTSC
