manualshive.com logo in svg

VDO Viewline 110 mm, Installation Instructions Manual, Page: 9 / 9

Share
Download
VDO Viewline 110 mm Installation Instructions Manual Download Page 9

11/14

1-9

9

20

21

19

GB

INSTALLATION INSTRUCTIONS: Viewline 110 mm

TU00-0758-5307102

Technische Änderungen vorbehalten  -  Technical details subject to change

TU00-0758-5307102

GPS Speedometer

Important

: Clean the instrument glass and front frame with water only. Do not use chemical agents. 

Accessories / Spare parts

Bush contacts 0.25 – 0.5 mm²   A2C59510846

Bush housing, 8-pin  

A2C59510847

Hand pliers  

Tyco No. 539635-1

Tool for hand pliers  

Tyco No. 539682-2

Single contacts 0.14 – 0.22 mm²   Tyco No. 1355718-1

Single contacts 0.5 – 0.75 mm²   Tyco No. 963729-1

Strip 0.14 – 0.22 mm²  

Tyco No. 1355717-1

Strip 0.25 – 0.5 mm²  

Tyco No. 928999-1

Bezel

Strip 0.5 – 0.75 mm²  

Tyco No. 963715-1

Bracket assembly mounting set   A2C59510854 

Flush mount fixing bracket  

A2C59510864

Flush mount seal  

A2C53215642

Push button 

A2C59512684

Fastening nut 

A2C53238881

Protective connector cap, 8 pin  A2C53324664

Protective connector cap, 14 pin  A2C53324671

Black

White

Chrome

Round

A2C53210749

A2C53210760

A2C53210761

Flat

A2C53210745

A2C53210746

A2C53210747

Triangular

A2C53210763

A2C53210764

A2C53210765

3.6 Resetting the day counter

1. Connect pin 1 to terminal 30 (Bat. +) 

2. Switch on the ignition (Term. 15, pin 4)

Press the mode button repeatedly until the trip distance is displayed.

Press and hold the mode button for longer (>2 sec.).

Trip is now deleted.

 3.7 Resetting the trip hour

1. Connect pin 1 to terminal 30 (Bat. +) 

2. Switch on the ignition (Term. 15, pin 4)

Press the mode button repeatedly until the trip time is displayed.

Press and hold the mode button for longer (>2 sec.).

Trip is now deleted.

Summary of Contents for Viewline 110 mm










Reviews:

No comments