04/11
INSTALLATION INSTRUCTIONS: Viewline 52 mm
Freshwater gauge (capacitive)
TU00-0752-9207102
1-5
5
Technische Änderungen vorbehalten - Technical details subject to change
TU00-0752-9207102
GB
Reconnect the battery after inspecting the connection.
If necessary, replace the main circuit switch. Turn on the ignition
and conduct a functional test. Reprogram any other instruments
that may have lost their saved settings.
Important: Clean the instrument glass and front frame with water only. Do not use chemical agents.
Align the instrument and hand-tighten the fastening
nut. Ensure that the nut is not tightened with a torque
greater than 400 Ncm.
* Make sure the seal lays flat between the panel and
the front ring.
If you would like to omit the fastening nut, you may
use the part set A2C59510854 as an alternative.
This is recommended if the installation location is sub-
ject to vibratory loads.
Screw the stud bolts into the provided drill holes in the
enclosure. Max. stud bolt torque is 1.5 Nm.
Place the bracket on the stud bolt and hand-tighten
the knurled nut.
* Make sure the seal lays flat between the panel and
the front ring (see Fig. 14).
•
Please note that when you disconnect the battery, all volatile
electronic memories lose their input values and must be repro-
grammed.
Accessories / Spare parts
Bush contacts 0.25 – 0.5 mm
2
A2C59510846
Bush housing, 8-pin
A2C59510847
Hand pliers
Tyco No. 539635-1
Tool for hand pliers
Tyco No. 539682-2.
Single contacts 0.14 – 0.22 mm
2
Tyco No. 1355718-1
Single contacts 0.5 – 0.75 mm
2
Tyco No. 963729-1
Strip 0.14 – 0.22 mm
2
Tyco No. 1355717-1
Strip 0.25 – 0.5 mm
2
Tyco No. 928999-1
Strip 0.5 – 0.75 mm
2
Tyco No. 963715-1
Bracket assembly mounting set A2C59510854
Flush mount fixing bracket
A2C59510864
Flush mount seal
A2C53215640
Fastening nut
A2C53007398
Front ring, flat; black
A2C53186040
Front ring, flat; white
A2C53186022
Front ring, flat; chrome
A2C53186023
Front ring, triangular; black
A2C53186024
Front ring, triangular; white
A2C53186025
Front ring, triangular; chrome
A2C53186026
Front ring, round; black
A2C53186027
Front ring, round; white
A2C53186028
Front ring, round; chrome
A2C53186029
Protective connector cap, 8-pin
A2C53324664
14
15
16
17
18
19
20
*
