GB
5
CONNECTING THE POWER DATA CABLE TO NAVIGATION UNITS
PC 3000 / SY587
When performing the installation of the Tuner Box to either the PC 3000 or SY587 navigation
computers it is necessary to modify the connection cable. Please follow these instructions for
installation carefully, failure to do so will result in the non-function of the Tuner Box and
navigation computer.
Remove the green connector block C2 from the power data cable. (Fig. 4)
- Using the two domino connector blocks supplied:
Secure the red wire into the domino and connect it to the pink wire B1 (refer to the cable
installation diagram of the navigation manual). (Fig. 5)
Secure the white wire into the domino and connect it to the brown/ pink wire B9 (refer to
the cable installation diagram of the navigation manual). (Fig. 5)
Connect the signal cable to point B on the rear of the navigation unit. (Fig. 6)
Connect the white connector block of the power data cable to the power/data socket of
the Tuner Box. (Fig. 6)
Reconnect your car battery terminals. (Fig. 7)
- After performing this procedure ensure that all wires not in use are safely secured and screened.
CONNECTING AN ANTENNA TO THE TUNER BOX
If your current antenna does not have a Din type adapter, please use the antenna adapter supplied.
Insert the antenna adapter into the ‘antenna’ socket of the Tuner Box.
Ensure that there is a distance of 40mm between the the antenna and the window surround.
To install and connect the Powered FM Antenna, please refer to the separate mounting instruction.
6
5
4
3
2
1
THE ON/OFF LED
The ON/OFF LED is located on the front side face of the Tuner Box.
The LED’s function provides the user with a visual indication of the status of the Tuner Box.
The LED will become active when the ignition is switched on and initialization of the unit occurs.
The LED will remain illuminated whilst the unit is functioning and the car ignition is on.
The LED will cease to function when the ignition is switched off and the unit’s power has dissipated.
This procedure will usually take about 5 seconds.
If you cannot find a solution to any problem you may encounter, contact an authorized dealer
or call our customer help desk:
VDO Car Communication Ireland
Newstead, Clonskeagh,
Dublin,14
Tel: (01) 7640000
VDO Car Communication UK Ltd
AN Division,Holford Drive, Holford
Birmingham B6 7UG
Tel: 0121 344 5400
Fax: 0121 344 5402
mt5010 gb v11.qxd 31.10.2001 14:20 Seite 5
