background image

Info point

Shows additional information on an info point in the near vicinity (red light camera,
fixed speed camera), as long as the

S

symbol is shown on the display. Also see “C-IQ

– Intelligent Content On Demand”, page 53.

Relevant C-IQ products must be activated.

Tourist attr.

Shows additional information on a tourist attraction in the near vicinity, as long as the

I

symbol is shown on the display.

Relevant C-IQ products must be activated.

Travel info

Displays the travel info menu which you can use to search for special destinations in
your C-IQ Travel info products, simply and easily. Also see “Travel info”, page 57.

Relevant C-IQ products must be activated.

Destination

Display of current destination address with name (if entered), country code, city, road,
house number or crossing.

If you are not on a digitised road the GPS position will be displayed.

Route criter.

The route criteria selected for the current route will be displayed in this menu. In addi-
tion, you have the opportunity to change the route criteria and to restart route plan-
ning. Also see “Route selection”, page 30.

Furthermore, in the upper section of the screen you will also see the selected route
options which can be configured in the SETUP menu under “Navigation” (e.g. to
avoid toll roads).

Route list

This information screen displays a list of the sections of the planned route, beginning
with the current car position.

Navigation

37

Summary of Contents for MS 4300

































































Reviews: