Adjusting the LCD monitor
If mounted on the supplied support, the monitor can be adjusted to your viewing
angle.
☞
Turn the monitor until the best angle of view is reached.
☞
Press the release button on the monitor support to tilt the monitor to its best
position.
Remote control
The VDO Dayton Navigation System is controlled by an infrared remote control.
☞
Press the release keys at both sides of the holder to remove the remote control.
A
Before driving off, slide the remote control back into the holder until it clicks into
position.
The keys on the remote control have the following functions:
ALT-R
Plan an alternative route.
REP
Repeat current acoustical guidance advice.
8
Cursor key upwards; select options.
4
Cursor key left; select options.
6
Cursor key right; select options.
2
Cursor key downwards; select options.
OK
OK key; confirm a selection.
-
Decrease voice volume of guidance advice.
+
Increase voice volume of guidance advice.
MENU
Show main control menu.
If you use your remote control in its holder, the internal batteries are not used.
When the batteries are exhausted the navigation system may no longer react on key
presses.
☞
Slide the remote control into its holder to resume normal operation.
☞
Replace the batteries.
Keyboard illumination
The keyboard of the remote control is illuminated when you press one of the keys. The
illumination is switched off automatically after a while. When inserted in the holder
the keyboard is illuminated permanently as long as the ignition is switched on.
OPERATION
14
3112 316 0888.1 Neudruck
Donnerstag, 24. August 2000 11:00:58
Farbprofil: Deaktiviert
Komposit Standardbildschirm