23
English
RDS (Radio Data System)
This unit is equipped with an integral RDS de-
coder which supports stations that transmit RDS
data. This system displays the name of the re-
ceived station (PS) and can automatically set the
station with the best reception during long-dis-
tance journeys (AF switching). Additionally, if a
traffic announcement or a programme type
(PTY) is transmitted by an RDS station, this can
be received independent of the set operating
mode. If additional EON data (extended other
network) is received, the system can switch au-
tomatically between stations of the same net-
work and interrupt programmes in order to re-
ceive traffic announcements (TP function).This
function is not available in certain regions.
RDS functions are only available for VHF op-
eration.
• ”AF”
: Alternative frequency
• ”PS”
: Programme service name
• ”PTY”
: Programme type
• ”EON”
: Extended other network
• ”TP”
: Traffic programme
* RDS interruption is not possible during AM radio reception
or television operation.
AF function
Via the AF function, the unit switches to an-
other frequency in the same station network
in order to maintain optimal reception.
* The initial factory setting is ”
ON
”.
●
●
●
●
●
Switching off AF function (OFF)
Press the AF button
7
.
”AF”
extinguishes on
the display.
●
●
●
●
●
Switching on AF function (ON)
Press the AF button.
”AF”
illuminates on the
display.
∗
If the reception of station deteriorates after a time,
”SEARCH”
appears on the display and the tuner searches
for the same transmission on another frequency.
∗
The
”AF”
display begins to flicker if the reception deterio-
rates.
RDS operation
REG function (regional programme)
The optimal regional station can be received
if the REG function is switched on. If this func-
tion is switched off and the regional transmis-
sion area changes during the journey, the re-
gional station for this area is then received.
* The initial factory setting is ”
OFF
”.
Note:
• This function is blocked if a national station is
being received, e.g. BBC 2 FM.
• The ON/OFF setting is effective if the AF func-
tion is set to ON.
●
●
●
●
●
Switching on REG function
If
”REG”
does not illuminate on the display,
press the AF button
7
for at least 2 seconds.
”REG”
illuminates on the display.
●
●
●
●
●
Switching off REG function
Press the AF button for at least 2 seconds. The
”REG”
display extinguishes.
Manual tuning of a regional pro-
gramme in the same station network
Note:
•
This function can be used for receiving a region-
al station in the same station network.
1. This function is effective if the AF function is
switched on and the REG function is switched
off.
2. Actuate one of the preset but-
tons
c
to recall the regional station.
3. Each time the same preset button is pressed,
the unit switches between the regional pro-
grammes of the same station network.
Summary of Contents for MR6000
