Route selection
During guidance, you may also modify the route criterion and activate or deactivate
dynamic route planning. The system will then plan a new route taking into account
the new setting of the current position of your car.
☞
In the guidance screen, select the symbol for route selection (on the basis of the
setting in the destination input
U
,
V
,
W
or
X
).
The following options are available:
–
Dynamic route*: Use this option to specify
whether or not TMC traffic information should be
taken into account in route planning.
–
Fast: If you prefer a fast route
–
Short: If you prefer a short route
–
Main roads: If you prefer expressways
–
No main roads: Avoids expressways
In addition, you can bypass toll roads when planning your route.
☞
Activate the “
No toll road
” option if you wish to avoid toll roads as much as
possible.
✎
If no toll-free roads are available, toll roads will be included for planning the route.
Note:
If this option is activated, route planning may take longer than the time needed
with this function deactivated. Therefore this option should only be activated if needed.
* only with TMC extension connected
38
GUIDANCE
Route selection
Dynam. route
Fast
Short
Main roads
