■
Mirroring the display contents
When the MM 5200 is installed overhead (e.g. holder on the windscreen), the display con-
tents can be mirrored on the horizontal axis.
☞
Press the
2
button to mirror the display contents.
☞
Press the
8
button to show the display contents in normal mode again.
■
Quitting setting mode
☞
When you have made the desired settings, press the
OK
button on the remote control.
:
The values set are saved and the MM 5200 returns to normal mode. The ready LED illumi-
nates continuously again.
✎
Setting mode is quit automatically after 10 seconds if you do not make any settings within
this time.
Troubleshooting
In rare cases, your system may not function the way you expect it to. Before calling the Servi-
ce department, please read the operating instructions thoroughly and go through the follo-
wing checklist; it may be possible to quickly remedy an apparent malfunction.
Symptoms
Possible cause / remedy
The picture is excessively dark/bright.
• Set the desired brightness in the settings menu.
No sound is audible.
The MM 5200 does not have a built-in loudspeaker.
• Use the recommended accessories.
The hue of the navigation display appears
“corrupted” or the image rolls (is not
synchronised).
• Activate the “Sync. in green” setting in the “Settings” menu of
the navigation computer.
(Please contact your authorised dealer if you have any further
queries).
Hotlines are available in many countries to handle queries regarding our multimedia sys-
tems. You can find the applicable telephone numbers on the internet at:
www.vdodayton.com
© 2005 Siemens VDO Trading GmbH. All rights reserved.
These operating instructions are subject to copyright.
Subject to technical and visual changes and typing errors.
OPERATION
7
English