OPERATION
15
Eng
li
sh
Volume of call
during a phone call, the volume can be adjusted via the
+
or
-
buttons of the remote
control. The last setting selected is stored.
Otherwise, adjustment of the volume is at the mobile phone.
Direct call number input
1. In the Start screen, highlight the symbol
and press the
OK
button.
The "Dial" menu appears.
2. Enter the required call number. For this purpose, move the cursor to the relevant num-
bers and then press the
OK
button each time.
1
The entered call number is displayed in the first line. If you enter an incorrect charac-
ter, the last character can be deleted by selecting the
symbol.
3. To establish the connection, select the
symbol.
Pressing the
OK
button ends the telephone connection.
1
Call numbers with control codes (e.g. ‘#’ at the end) must be dialled on the mobile
phone, otherwise the error message ‘Invalid Number’ is displayed.
Direct dialling of displayed call numbers (with CDs with travel guide)
With map CDs with travel guide information, phone numbers are indicated for many
points of interest (see "Points of interest" in the navigation system operating instructions).
If the destination chosen features a telephone number, this can be dialled directly.
1. Select the desired destination from the points-of-interest list.
2. Call up additional information regarding the desired destination (see navigation
system operating instructions)
3. Highlight the call number and confirm with
OK
.
The connection is established.
Dial
¡
£
N F p
* + #
1 2 3 4 5
6 7 8 9 0
MG3000_mono_en.book Seite 15 Donnerstag, 15. August 2002 8:24 08