3
Device description
Automatic activities after ignition on/off (default)
38
Instruction manual DTCO 4.1 - Edition 02/2023 - BA00.1381.41 100 102
■ Automatic activities after
ignition on/off (default)
Automatically set activity:
After ignition on
Driver 1 and driver 2
Break time / rest time
Other working time
Standby time
?
No change
After ignition off
Driver 1 and driver 2
Break time / rest period
Other working time
Standby time
?
No change
IMPORTANT
The vehicle manufacturer may have
already programmed defined settings of
the activity after
ignition on/off
.
• Mark the set functions in the table by
(√).
IMPORTANT
An exception is the addition of activities
on the driver card. This option is dis-
able during
Manual input
. There is no
change of activity after
ignition
on/off
.
The automatic setting after
“ignition on/
off
“ is visible in the standard display. The
activity flashes for approx. 5 seconds
and subsequently, the previous display
reappears.
Standard settings:
Summary of Contents for DTCO 4.1
