7
First menu level – Standard values
Menus
© Continental Automotive GmbH
75
IMPORTANT
In order for the VDO Counter to display
valid information, the following condi-
tions must be met for the evaluation of
data:
• A complete addition of your activities
to the driver card.
Manual entries (Entry / Addition)
• A correct setting of the current activ-
ity – no remote control; e.g. no unin-
tentional setting of the activity work-
ing time·
·instead of daily rest
time
.
• The entry of ferry/train and your cur-
rent activity.
Ferry/train: Entering start/end
Description of the VDO Counter
display
VDO ? 00h09
00h45 04h30
11h00 03h50
00h00 01h09
Fig. 61:
VDO Counter - display creation
IMPORTANT
The flashing
h
means: This display part
is currently active.
(1) Currently set activity
(2)
?
= User note
Periods with unknown activity
?
or
insufficient data (e.g. use of a new
driver card) are stored on the driver
card.
The VDO Counter evaluates miss-
ing activities such as activity
. If a
relevant time overlap is detected in
the driver activities, this is dis-
played by the symbol
!
instead
of the symbol
?
And the driver
activity.
(3) Remaining driving time
When driving: Display how much
longer you are permitted to drive.
(
00h00
= driving time com-
plete)
(4) Remaining rest time
Length of the next required break/
rest time.
If the set activity is
, the remaining
break/rest time is counted back.
(
00h00
= Break complete).
(5) Future driving time
Length of the future driving time
after observing the break / rest
time.
(6) Latest start daily rest time
If the set activity is
, the remaining
time to the start of your required
daily rest time, for example, is dis-
played.
Service Only!