4
Operation (general)
Downloading data
46
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
IMPORTANT
Possible loss of data during the transfer
onto the download key.
Do not interrupt the connection to the
front interface during the data transfer.
3. Please close the cover flap
(1)
after
downloading the data.
► Data identification
The copied data is assigned a digital sig-
nature (identification).
This signature allows to assign the data
to a specific driver card and to check its
completeness and authenticity.
IMPORTANT
Detailed information about the readout
software or the download key is in-
cluded in the corresponding document-
ation.
► Downloading from the mass
memory
Data can only be downloaded from the
mass memory with the company card.
You can set on the download key which
data (card or mass memory) is to be
downloaded.
► Remote-controlled download
(option)
A fleet management system (remote op-
eration) also enables a remote-controlled
download of the data after successful au-
thentication of a company card.
IMPORTANT
Detailed information about the hard-
ware and software components re-
quired for this as well as their usage is
included in the corresponding docu-
mentation.
Service Only!