DLKPro Inspection Key • Operating Instructions – Edition 03/2012
3 Getting started with the DLKPro
3 Getting started with the
DLKPro
With the DLKPro you can
•
download driver cards via the integrated chip card reader; see page 15.
•
check the data shown on the screen – immediately after card downloading (card check) – to determine whether
or not it contains infringements of Regulation (EC) No. 561/2006 (
Activities
data block) and/or signs of
suspected tampering exist (
Events and Faults
data block relating to the driver card); see page 19.
•
carry out a quick check on the digital tachograph if, for instance, the quick check of the driver card has revealed
any signs of suspected tampering; see page 9.
•
download the digital tachograph’s mass data to perform any further checks, e. g. for checking the speed data;
see page 13.
•
use the PC programme to immediately determine whether or not any suspicious events detected during the
initial analysis of driver card or mass memory data are revealed; see page 28.
•
use the PC programme to specify the tolerance values for the suspicious event check; see page 36
•
use the PC programme to check whether or not the data has been downloaded without errors; see page 40.
•
process and manage the download files in accordance with the pertinent legal regulations; see page 31.
Synchronising the clock and
downloading data for the first time
The DLKPro has an integrated real-time clock, which is
based on UTC time. The first time the device is
connected to a digital tachograph the clock is
automatically synchronised – provided that a company
card, control card or workshop card is inserted in the
digital tachograph.
Insert your company card, control card or workshop
card into the digital tachograph.
Plug the DLKPro into the digital tachograph; see
page 12.
The mass memory and driver card data is
downloaded.
The clock is synchronised.
You can carry out a first check of the downloaded
data directly on the screen or examine it thoroughly
using the “DownloadTools” PC programme; see
page 16 and page 28.
Note
: Before using the DLKPro to check drivers and
vehicles, you should
• specify the tolerances for the infringement and
suspicious event checks (see page 36) and
• check the Inspection Key’s configuration to ensure
that the data blocks required for the quick check are
downloaded; see page 33.
If you do not make any amendments here, the default
factory values will be used for the check.
