GB
46
Note:
Fix the cables at short intervals (approx. every 500 mm)
so that they do not vibrate.
Note:
When installing into the dashboard, make sure that the
DLD
®
Wide Range II can be removed quickly, e.g. to carry out a
manual
fi
rmware upgrade or for the subsequent installation
of an antenna.
Tip:
Put the sticker (included in the package) over the DIP
switch and USB interface openings in the housing to prevent
any foreign matter getting into the device.
Installing the DLD
®
Wide Range II
Requirements
• Installation location determined
• DLD
®
Wide Range II con
fi
gured
• Power supply and CAN interface cables installed
Summary of Contents for DLD Wide Range II
