24
RANDOM
To activate or deactivate the random track, disc
on directory play
1. Press OK to enter SD/MMC menu.
2. Press ( / ) button to select.
a. CD: ON, OFF
b. MP3: OFF, DIR, ALL
•
RANDOM mode will launch upon selection of
the entry above.
REPEAT
To continually repeat current track.
1. Press OK to enter SD/MMC menu.
2. Press ( / ) button to select.
a. CD: OFF, SONG
b. MP3: OFF, SONG, DIR
•
REPEAT mode will launch upon selection of
the entry above.
CAR COMPUTER
You can set the computer parameters.
Car computer menu
1. Press HOME key to select COMPUTER
source.
2. Press OK to enter car COMPUTER mode.
3. Use the ( / ) button to select function.
4. Use the ( / ) button to choose settings.
5. Press ESC/HOME to go back previous menu
or HOME page.
SPEED INFO
1. Use ( / ) button to select SPEED INFO.
2. Use ( / ) button to select: Max (Maximum
speed), Average (Average speed) or Actual
(Actual speed).
Note: You can use this function only when the
speed signal is connected and calibrated.
TRAVEL
You can view the travel time and distance with
this function.
1. Use ( / ) keys to select TRAVEL to view
information.
TEMPERATURE
1. Use ( / ) button to select and view the
TEMPERATURE.
Note: You can use this function only if the
temperature sensor is connected.
BATTERY VOLTAGE
1. Use ( / ) button to select and view
BATTERY voltage.
CLOCK/DATE
1. Use ( / ) button to view CLOCK/DATE.
RESET TRIP
1. Use ( / ) button to select RESET TRIP.
2. Use ( / ) button to select: MAX SPEED, AV.
SPEED, TRIP or ALL DATA.
3. Press OK to activate reset.
CAR ALERT SERVICE
1. Use ( / ) button to select SERVICE.
2. Use ( / ) button keys to select:
NEXT SERVICE DATE or AFTER.
Note: Service alert will sound and shown on
display when preset date or distance is reach.
User can select OK to STOP or ‘SLEEP’. If OK
is selected, service alert will be cancelled. If
‘SLEEP’ is selected, service alert will sound
again every 15 minutes until it is cancelled.
“Service Alert” , once shows in display , it will
go to sleep for another 15 min and alert the
user every 15 mins until it is cancelled
SPECIAL FUNCTIONS
CONFIGURATION
Calibrating the Speed
To avoid unneccessary distraction we advise
that this procedure is carried out with the help
of somebody else.
1. While stationary, hold down the 'OK'
key and turn on the set.
2. The set mutes.
Display shows 'RE-CALIBRATION'
and '50KM/H' (30 MPH) alternately.
3. Now drive to 50KM/H (30 MPH).
Always obey the highway code and
current
traffi c restrictions and conditions!
4. Once 50KM/H (30 MPH) is reached, press
OK key. You hear a beep and display shows
'CALIBRATION OK'.
5. Now turn the set off and then on again to
return to normal operation. Level 2 is chosen
as default value for SMART Volume.
Note: If you want to abort the calibration before
reaching the speed, press ESC.
