9
9
* Depending on version
SECURITY
For theft protection this set is provided with the
following security features :
DETACHABLE FRONT
Take the detachable front with you when leaving
the car. Keep it in its protective box.
Always replace the detachable front before starting
to drive.
Removing the front (See page 3, figure B)
•
Press
to flip down the detachable front.
•
Pull at the left hand corner of the detachable
front to remove the front.
Replacing the front (See page 3, figure C)
•
Insert the detachable front starting with any side
of the set.
•
Push the detachable front until it clicks into
position.
LOCKING THE DETACHABLE FRONT (See
page 3, figure E)
The detachable front can be locked by a D2 x10
screw.
•
Remove the trimplate
•
Flip down the detachable front.
•
Insert a D2 x10 screw (inside the accessories
bag) in position
1
.
SECURITY LIGHT
•
The LED flashes when the detachable front is
removed when the ignition is off. You can switch
off the flashing warning light. See 'SETUP' (page
15 ), option 'LED' .
IDENTIFICATION NUMBER
This set has a unique identification number (stated
on the 'Security card'). This card is required as a
proof of ownership when the set is stolen, when
the detachable front is lost or when requesting
service.
•
Remove the 'Security card' before installing the
set. Do not keep the 'Security Card' in your car.
AUDIO
ON/OFF
•
Press
to switch on the set. Press
for more than 2 seconds to switch off the set.
VOLUME
Please make sure you can still hear the traffic
(horns, sirens........)
•
Turn the volume knob to adjust the volume.
Turn the
Rotary Knob
The volume automatically increases or de-
creases if the SMART Volume connection has
been installed and selected (See Installation).
Note :
You can adjust the start-up volume. When
the start-up volume is set to maximum level, it
may be extremly loud when you switch on the
set. See 'SETUP', option 'Start'.
MUTE
•
Press
to mute/demute the sound when
the set is switched on.
Note :
You can adjust the mute level.The volume
may be louder during mute when the mute level
is higher (e.g. 16) than the current volume (e.g.
5). See 'SETUP' , option 'MUTE'.
AUDIO MODE SETTING
•
Press
to select desired audio
mode.
•
to adjust the selected
audio mode.
– BASS : Bass (-7...+7)
– TRE : Treble (-7...+7)
– BAL : Balance (-7...+7)
– FAD : Fader (-7...+7)
– Sound Style ( USER,FLAT,JAZZ,VOCAL,
POP,CLASSIC,ROCK)
After 5 seconds the display goes back to the
last mode of operation.
Adjustment of Bass and Treble setting is only
possible when USER is selected as the
sound style.
Different Sound style can be set for each
source* (Radio, CD/MP3* ).
