10
10
* Depending on version
PRESELECTED STATIONS
Manually storing stations in a preset
You can manually store 18 FM stations, 12 MW
stations and 6 LW stations.
•
Press
to select desired waveband.
•
Tune in to the desired station.
•
Press the desired preset key (1 to 6) for more
than 2 seconds to store the current tuned
station.
Press the desired preset key (1 to 6) to recall
the stored station.
When storing an FM station, the relevant
RDS information and AF mode (on/off) are
also stored on the preset.
Recalling a preset(Short press)
•
.
To
SETUP'
SOURCE
•
Press
to select the desired source :
- TUNER
- CD/MP3*
AUTOMATIC SEARCH
Use search tuning to automatically search for a
station.
•
Press to tune to a station of a lower frequency
or to a higher frequency
– You will receive a station after a short time.
search for another station, press the key again.
Note : You can select the search sensitivity for
FM. See 'SETUP', option 'LO/DX'.
Frequency scan / Preset scan (see '
option 'SCAN')
Frequency scan allows you to listen to each located
station on the current waveband while Preset scan
allows you to listen to each stored preset station
on the current waveband.
or
Note :
You can select how many seconds each
station is scanned, see 'SETUP' option
'SCANTIME'.
Manual tuning (if you know the frequency of
the required station)
•
To switch to manual tuning :
See 'SETUP' , option 'TUNING'; set value to
'MAN.TUNE'. The radio remains in manual
tuning mode until you change this setting back
to 'AUTOTUNE'.
•
Press to tune to a station of a lower frequency
or to a higher frequency.
•
Press
to
Frequency scan(exclusion of FM A-Z) or
Preset scan
activate
W (AM) bands if
RADIO
WAVEBAND
•
Press
to select the desired band:
Note :
You can suppress MW/L
not required. See Setup, Option 'MW/LW(AM)'.
1
1
1
2
2
2
3
Automatically storing stations (AUTO-STORE)
This function automatically stores 12 strongest FM
stations in the FMAST band or 6 strongest
MW(AM) stations in the MW(AM)AST band. When
you use Auto Store, the new stations replace any
stations previously stored in the FMAST band or
the MW(AM)AST band.
•
Press
to activate autostore.
– The set gives a beep and then mutes.
– When it has finished, you hear a beep followed
by the station stored on preset 1.
– Sometimes it may not be possible to find 12
stations.
