7
• ILLUMINATION COLOR
Press the button (12) for 2 seconds to
change the color of LCD.
• RESET
RESET
button (26) is placed on the front
panel and must be activated with either a
ball point pen or thin hard object.
The
RESET
button (26) is to be activated
for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
Pressing the
RESET
button (26)
will erase your stored stations in the
memory.
• RDS CLOCK
Press
DISP
button (4) to view RDS clock
time from the received RDS station.
• ON/OFF
Switch on the unit by pressing any button,
except
REL
button (1) and the
CD eject
button (9). When system is on, press
POWER
button (3) to turn off the unit.
• VOLUME/BASS/TREBLE/BALANCE/
FADER ADJUSTMENT
Press
SEL
button (22) to select the
desired adjustment mode.
The adjustment mode will change in the
following order:
By turning
AUDIO ADJUST
button (2),
different setting levels can be adjusted.
Note:
Bass/Treble selections are only
active when the DSP (Digital Sound
Processor) is switched off.
Press
SEL
button (22) for 2 seconds, it
will trigger a series of Advanced RDS
setting. Refer to RDS (Radio Data
System) operation section for details.
• SOUND
Press
SOUND
button (23) to turn on sound
DSP function (Digital Sound Processor) and
to select desired audio mode.
There are five kinds of mode as below:
Activating the DSP overrides the prior
selected Bass/Treble settings.
• LOUDNESS
Press
LOUD
button (8) for 2 seconds to
reinforce the bass output and display will
show
“LOUD”
. Press it for 2 seconds
again to release this function.
• MUTE
Press
MUTE
button (24) to silence the
receiver. Press it again to resume
listening.
• FLASHING LED
If the front panel is removed from the unit,
the
LED
(25) will be flashing.
• SOURCE
Press
SOURCE
button (12) to switch
between CD and Radio.
GENERAL OPERATION
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
Volume
Bass
Treble
Balance
Fader
• BAND SELECTION
At tuner mode, press
BAND
button (8)
shortly to select the desired band.
The reception band will change in the
following order:
• STATION SELECTION
Press
TUNE/TRACK
buttons (10) or (11)
shortly to activate automatic seek
function. Press for 2 seconds until
“MANUAL”
appeared on the display, the
manual tuning mode is selected. If both
buttons have not pressed for several
seconds, they will retune to seek tuning
mode and
“AUTO”
appeared on the
display.
• AUTOSTORE
- Automatic Memory Storing
Press
AST
button (7) for 2 seconds.
The radio searches for 6 strongest
stations and stores them into the
presets of the currently selected band.
Note:
Any stations that were previously
stored in this memory bank are replaced
by the new stations.
RADIO OPERATION
FM1
FM2
FM3
MW
LW
English
