6
DIN FRONT-MOUNT (Method A)
Installation of the unit
1. Metal Sleeve
Install the metal sleeve in the dashboard.
For optimal performance of the CD
player, the metal sleeve should be
positioned horizontally (between –10 and
+30). Fix metal sleeve into place by
pressing the metal tags outwards using
screwdriver.
2. Front Mounting
Slide the radio into the metal sleeve until
the springs at either side of the radio
snap into the openings of the sleeve.
3. Removing Radio
Insert the levers supplied with the unit
into the grooves at both sides of the unit
until they lock. Pull the levers toward
you makes it possible to remove the unit
from the dashboard.
JIN REAR-MOUNT (Method B)
Installation using the screw holes on the
sides of the unit.
Remove the outer rim around the front panel
and the side springs. Select a position
where the screw holes of the mounting
bracket and the screw holes of the radio
become aligned and tighten the screws at
2 places on each side.
182
53
See details at the back of the cover page
for remove (figure A) and install (figure B)
the front panel.
1. Press the release button and pull-off the
front panel. Keep front panel into the
case.
2. To install the front panel, insert the panel
into the housing, slide in to the right hand
side and push in till locked.
3. Make sure the panel is properly installed.
Otherwise, abnormalities occurs on the
display or some keys will not function
properly.
HOW TO REMOVE AND INSTALL THE
FRONT PANEL
SECURITY IDENTIFICATION NUMBER
• A security identification number is stated
on the “Security Card” . Show this card
as a proof of ownership, when the set is
stolen, when the detachable front is lost
or when requesting service.
• Do not keep the “Security Card” in your
car .
