![background image](http://html.mh-extra.com/html/vdo/cancockpit-series/cancockpit-series_product-manual_858176022.webp)
2.5 Display Functions
Five main display functions have been specified for the Master gauge. (s. picture below) As the number of displays in each
main function is configurable (except for odometer and hourmeter), the actual number of displays can be up to a maximum of
146.
A maximum of 30 Warnings and 30 Alarms can be set. The Physical Values of the defined Satellite gauges can be shown on
the display (if configured). A total of 25 physical value Displays (PVD) are possible, including the physical values inidcated by
the Satellite gauges. Thus with increasing numbers of Slaves defined by WINgauge, the number of freely selectable physical
values to be displayed on the dot-matrix decreases.
2.5.1
Navigation through Display
The order of the display groups is: Odometer / Hourmeter, Alarms, CAN DTCs, Service Messages, Physical Values, Warnings
and then back to Odometer / Hourmeter. The Alarms, CAN-DTCs, Service Messages and Warnings are being monitored and
appear only if they are activated. If the button is pressed more than 2 sec., the LCD shows the main display which is
Odometer / Hourmeter.
2.5.2
Display Layout
The Dot-matrix Display has 132 x 33 dots.
The following picture shows the proposed display layout. The outer line represents the LCD glass and the inside marks the
active display area. The structure inside has only been drawn for illustration; it is not visible on the display itself
2. Functional Specification
Product Manual
Technische Änderungen vorbehalten Technical details subject to change
2 - 12
TU00-0726-0000002
0609
1. Odometer
Hourmeter
2. Physical Values
Display (max. 25)
3. Service Interval
Message (max. 15)
4. CAN Diagnostic
Trouble Codes (max. 5)
5. Warning and Alarm
Messages (max. 30)
45)
60)
Summary of Contents for CANcockpit Series
