VDO 360-081-029-004C, Manual, Page: 44 / 176

44
M10 x 1.0 10 Nm
1/8 – 27 NPTF 10 Nm
M12 x 1.5 15 Nm
01.02.2020 15 Nm
M14 x 1.25 20 Nm
M14 x 1.5 20 Nm
1/4 – 18 NPTF 20 Nm
1/2 in. – 20 Whit. S 20 Nm
5/8 – 18 UNF-3A 20 Nm
M16 x 1.5 30 Nm
M18 x 1.5 30 Nm
M20 x 1.5 30 Nm
M22 x 1.5 30 Nm
M24 x 1.5 30 Nm
M26 x 1.5 30 Nm
3/8 – 18 NPTF 30 Nm
3/8 – 18 Dryseal NPTF 30 Nm
1/2 – 14 NPTF 30 Nm
3/4 – 16 UNF-3A 30 Nm
R 3/8 30 Nm
R 1/2 30 Nm
Tightening Torques for
Temperature Senders
The values given in the following table for
maximum tightening torque are exclusively based
on the load capacity of the temperature sender
(Nm max. Sender).
Prior to using the temperature sender, it is
important to ask the relevant manufacturer of
the vehicle, equipment system or engine for
the maximum torque value of the threaded hole
into which the temperature sender is to be
screwed (Nm max. Installation Area).
Non-observance of the maximum tightening
torque specified for the respective threaded hole
can result in damage to the vehicle, engine or
equipment system.
Tightening Torques for Temperature Senders
Nm max.
Sender
Tightening Torques for Temperature Senders