33
M3 WR
Bike selection: bike 1 or bike 2
The VDO M3 can be used on two bikes.
The data is separately recorded and saved for each bike.
This menu area can be used to select which bike you want
to ride.
How to select a bike:
Press and hold the BIKE and SET buttons
simultaneously for a few seconds.
The
bike selection menu
opens.
The
most recently selected bike
is
displayed
.
Press the
BIKE button
to change to bike 2 (or bike 1 if bike
2 was previously selected).
Press the
SET button
to confirm the bike selection.
The message
Set OK
appears to confirm the selection.
NOTE:
if you now start a trip on bike 2, do not forget to reset
the trip data for the last trip to zero.
Information on how to reset the trip data can be found on
page 32.
