28
M3 WR
Settings – total values – total ride time
The
next digit
on the left starts to
flash
and is ready
to be set.
Press the
BIKE button
to set the value for this digit.
Press the
SET button
to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the
SET button
.
The
setting
for the
minutes
is then opened.
Press the
BIKE button
to set the minutes.
Once the minutes have been set, confirm the setting
by pressing the
SET button
.
The response
“Set OK”
appears on the display.
If you want to configure further settings,
press the
BIKE button
to access these.
If you do not want to configure any further settings,
press and hold the SET button
.
The settings menu closes.
The VDO M3 returns to function mode.
