VDigi Electronics
Q5: The 720p/1080i picture is not showing the widescreen correctly in monitor.
5.1 Most of the monitor is not support widescreen 16:9 because the aspect ratio is 4:3,
so you will have to adjust your monitors vertical (top and bottom) adjustments to
display the black bars on bottom. Then you will have a widescreen image.
Q6: The picture in 720p/1080i has some rolling line distortion
6.1 Set the DIP switch, use mode 2, change the switch 4 from OFF to ON.
Q7: The picture has distortion when I use PC by pass.
7.1 The VGA resolution can only up to 1280x1024@60hz, don’t use the resolution
higher then it.
7.2 Please use the VGA cable with ferrite core filter.
Q8: Dashboard can’t show up in 480i setup mode.
8.1 480i Setup mode only workable under RGBHV sync mode, you can use it or not
depends on your monitor, not all monitor support this simplified
480i setup mode,
this simplified 480i setup mode can display a incomplete screen, so that you can
set the XBOX dashboard on your monitor directly. (XBOX dashboard is in 480i). It
is not guaranteed that you can use this feature.
Q9: I can see the dashboard in 480i setup mode, but the screen looks incomplete
and unstable.
9.1 The 480i Setup mode is a simplified version of 480i display, for most of the
monitors, it cannot support the resolution of 480i, since 480i is a TV standard
resolution. Monitors normally support higher resolution then TV. Technically the
outcome of the 480i display may not as normal as expected in TV, However, to let
users to display 480i in your monitor, we added this “extra feature” in order to let
users have a chance to setup the dashboard on monitor directly, save up time to
set dashboard in TV.
VDigi VD-Z3 Component -> VGA Transcoder
Page
18
