Manual MC3-EGA
Documentnr.: 180413
version 1.0
Page 6 of 12
5.
Network settings
The MC3-EGA will be connected to a TCP/IP network and can be set to use a static IP address or
to use a DHCP server to obtain one.
In order to make a connection to the controller, it must be given an IP address. The IP-address
can be configured using “VDH IP configurator” (VDH_Conf). (downloadable from the VDH
Products website, named: “VDH IP configurator” Configuration programm for Ethernet ports).
This program can search for connected VDH MC3 controllers and using the MAC-address of the
MC3, the IP-address can be obtained.
Start the program and select an interface. Press scan to search for available MC3 controllers. All
found devices will be listed. Both MAC-address and IP address will be shown.
The MAC-address of the MC3-EGA is printed on a sticker which is placed mounting plate. Using
this MAC-address, the device can be selected in the list.
Select the device and alter the network settings as desired. Enter the password (default: admin)
and click on the button “Set” to change the network settings of the selected MC3.
Note:
By default the MC3-EGA uses IP address: 192.168.250.101