VCS Videojet Series, Manual

Page: 20 / 78

Installation
22
VideoJet
Data terminal You can connect a data terminal to the
VideoJet
for commission-
ing and local control. The data terminal consists of a computer with
a terminal program. Use a standard serial cable for the connection.
)
Connect the RS232 interface CONTROL TERMINAL to a free serial
interface of the computer.
Camera and
device control The connection TRANSP. DATA serves to control a device con-
nected to the
VideoJet
, e.g. camera, multiplexer or VCR.
The range of devices with can be controlled with VideoJet (e.g.
dome camera systems) is being constantly expanded. Information
on installation and device control can be obtained from the supplier
of the controlled device.
Attention!
When installing and operating the device to be controlled, observe
the corresponding documentation. It contains important safety
notes and information on permissible applications.
Note
The transmission of transparent data is only possible when a video
connection has been made.