VCS VideoJet 8000, User Manual

Page: 63 / 148

Chapter 5 Configuration using a Web Browser
VideoJet 8000 63
Time format
The desired date format for the display can be selected:
]
Europe: DD.MM.YYYY
]
USA: MM/DD/YYYY
]
Japan: YYYY/MM/DD
System date and time:
If there are a number of units operating in your system or network, it is important
to synchronize their internal clocks. Only if all units operate with the same time it
is possible, for example, to make correct identification and evaluation of
recordings occurring at the same time.
– Enter the current date. It is not necessary to enter the day of week; this is
supplied automatically by the internal clock
– Enter the current time or click the Synchron. button to copy the system time
from your computer to the VideoJet 8000.
Time zone and Time server IP address:
The VideoJet 8000 can receive a time signal from a TIME server (NTP server)
and use it to set the internal clock. The unit calls up the time signal automatically
every two hours.
– Select the time zone where the system is located from the list.
– Enter the IP address of the desired NTP server.