www.videocamerasecurity.com
VCS-PTZCR detailed operating instruction
©2010
www.VCSDVR.com
2/4
一
.
Remote Controller--key features additional information
F1-F4:
advanced user-defined extensions, design for specific users and machine, general users will not need it.
Remote is a multi-model-fits-all.
HOME:
shortcut key of preset position, the user can customize a particular location.
DISP:
display software version number, non-customers use function key.
PRSET:
preset point setting key.
PATTERN:
set the parade path to preset point.
RUN:
Run "PATTERN" sett parade path, and quit the cruise mode.
A:
shortcut key of preset position (parade starting point).
B:
shortcut key of preset position (parade ending point).
CAM:
shortcut key of camera selection mode
SHOT:
into the preset point of call mode shortcut.
AUTO:
Automatic parade.
DELETE:
delete key of the preset point
SPEED:
camera speed setting key. S1 S1 S3 S4 (on cameras which support graduating speed)
ENTER:
confirm button, and automatic cruise stop button.
P1-P8:
shortcut of entering preset point.
S1-S4:
shortcut of different cruise speed.
SETUP
: Baud rate and protocol settings button.
(Note: Pelco-D protocol is only supported at this time)
二
.
Setting Methods
1. Call preset points
Press the "SHOT" button to enter Preset point call mode, respectively, enter the numbers 0-9 can be directly
invoked 9 below preset point, do not need to press "ENTER" button to confirm, the camera will reach preset
point position.
If want to enter 9 or more preset point, please press "-/--" key
To delete the wrong, please press "C" key and press "ENTER" key, the camera will arrive at the preset point
location.
2. Remove existing preset points
Press "DELETE" button for 3 seconds to enter delete mode preset points, respectively, enter a number 0-9 can
directly delete the following nine preset points, do not need to press "ENTER" button to confirm.
If you want to delete more than 9 preset points, please press "-/--" key, then you can enter values greater than 9.
To delete the wrong, please press "C" key, then press "ENTER" key, the camera will delete this preset point.
3. Set up a new preset points
Press "PRSET" button for 3 seconds to enter preset point setting mode, enter the numbers 0-9 respectively, can
be directly preset settings the 9-below point, do not need to press "ENTER" button to confirm. To set up more
than 9 preset points, press "-/--" key, you can enter values greater than 9. To delete the wrong, press "C" key,
then press "ENTER" key to confirm, when the preset point was successfully set.
4. Set tour path of preset points
The first step, set preset points. Example, pre-set point 1,point 2 and points 3, the location of these three preset
points and camera lens positions are different, that is, non-linear three positions.
The second step is to determine the parade path. Such as a parade of the three-point manner is 1-2-3-2-1 ... ...,
that is repeated among 123 parade.
