background image

Mar 11

Ventilation Control Products                                               Phone:  +46-(0)31-811666                                            E-mail:     [email protected]

Sweden

                                       Fax:      +46-(0)31-812766                                          Web:        www.vcp.se

Air Differential Pressure Transmitters

with 0-10 Vdc or 4-20 mA Output

984M-
series

Switch

Display

Step

   Information

Offset calibration

Current measured value

Re-calibration of offset

Show actual offset value

Store offset. Display blinking for confirmation

Setting switching level

Show actual switching level

Modify switching level

Store switching level. Display blinking for confirmation

Peak value high

Show peak value high

Return

Peak value low

Show peak value low

Return

Current measured value

Programming of 984M.5x3114 (the LED display version)

___________________________________________________________________________________________________________

___________________________________________________________________________________________________________

984M.5x3204,

 4-20 mA

Summary of Contents for 984M Series







Reviews: