Chapter 2 System Installation and Connections
VCON Desktop Systems Installation and Setup Guide
11
Connecting the ISDN Line (Cruiser 150/384)
The Cruiser 150 supports connection over one ISDN line, through a Basic Rate
Interface (BRI) or two B-channels. If your card is a Cruiser 384, you can connect
up to three ISDN lines (3-BRI or six B-channels).
³
To connect the videoconferencing card to an ISDN line
NOTE
Verify that the NT1 ISDN Adapter, installed by your phone company or
ISDN carrier, is connected and configured properly.
Cruiser 150
T
Connect an ISDN cable to the ISDN connector on
the videoconferencing card’s panel.
Cruiser 384
Cruiser 384 supports the connection of up to three ISDN
lines. If you are going to receive incoming
Bonding
calls, the order of connection, as detailed below is
important.
T
1 BRI
= 128 kbps connectivity. To use only one
ISDN line, connect an ISDN cable to the ISDN 1
connector.
T
2 BRI
= 256 kbps connectivity. To use two ISDN
lines, connect the first ISDN cable to the ISDN 1
connector and the second ISDN cable to the ISDN 2
connector.
T
3 BRI
= 384 kbps connectivity. To use three ISDN
lines, connect the first ISDN cable to the ISDN 1
connector, the second ISDN cable to the ISDN 2
connector, and the third ISDN cable to the ISDN 3
connector.