VCSBC64XX_HW.pdf – Hardware Documentation VCSBC64XX Smart Cameras
17
4.2.3
Electrical specifications of the VCSBC64XX Power Supply ST5 interface
Nominal Voltage:
12V – 24V
Maximum Power Consumption with one head
1
:
8.5 W
Minimum operational voltage (including ripple):
9V
Minimum Operating voltage and corresponding
current:
12V
700mA
2
Maximum Operating voltage and corresponding
current:
24V
350mA
3
Maximum operational Voltage (including ripple):
30V
Power must be connected to the 12 pin ST5 I/O connector.
Camera power is regulated inside the camera, so only an unregulated power source of 12 V to 24V is
required. The camera is, however, very sensitive to power supply interruption. Please make sure, that
the voltage never exceeds the limits of < 9V, > 30V even for a short period of time. In case of trouble it
is recommended to backup the power supply by a capacitor or a battery large enough to prevent
power interruptions.
1
Maximum power consumption without using the PLC output or onboard 3.3V supply.
2
Current drawn for PLC outputs and the 3.3V on board signal needs to be added to these figures.
©
1996-2011 Vision Components GmbH Ettlingen, Germany
