VC4XXX_HW.pdf – Hardware Documentation VC4XXX Smart Cameras
1996-2014 Vision Components GmbH Ettlingen, Germany
42
Further Accessories:
Article Description
Order
Number
Camera Connector
Power Adapter C6 24V, with 12 pins conn. 3m
VK000119
HRS connector female 12 pin
Power adapter for rail mounting, Input Voltage
100 - 240VAC 50/60 Hz, Output Voltage DC
24V +/-5%, max. 300 mA (7.5 W),
Equipped with connecting clamps for AC input
and 24V output, CE cert.
Using this power supply with VC Base
Cameras (VC4018 and VC4016) is only
possible when booting by switching the 24V
secondary side! 15W power supply needed
if switching the mains supply!
VK000036
VCSKBC4 Keypad (different from VCSKBC6
for VC20XX cameras!)
VK000238
IR cut filter (camera is shipped with this filter
mounted) refer to Appendix E
EK000625
Clear glass filter (replaces IR Cut filter)
EK000628
IR Transmitting Filter
EK000624
Flex cables for detached Camera Head mounting:
30mm length,20 core
5
EK000321
80 mm length,20 core
5
EK000322
200 mm length,20 core
5
EK000629
5
The feasibility of remote head mounting depends on working conditions (electrical noise, electro
magnetic radiation emitted from the camera, voltage drop over sensor cable, etc.). VC’s CE
certification is valid only for the standard camera set up.
!
