2. Video output connection ( Camera)
Please connect Camera to the unit over the Video input connector.
The unit provides 4 x BNC connectors.The camera installation
Procedures are as following:
i. Connect the video signal line: connect the video signal line to the unit
ii.Connect camera power line: Connect camera’s adaptor to camera, and
plug in the adaptor. The complete connection with a camera will be shown
as figure below
DVR Installation
3.Sensor Installation
The unit provides 4 sensor input for 4 channels. The sensor
Installation procedures are as follows. There are two simple steps
For the installation of the sensors.
i. Connect the sensor signal line: Connect the video signal line to the unit. The
Sensor signal terminal is at the unit’s back panel
ii.Connect the sensor adaptor jack into the sensor, and plug in the adaptor.
power outlet
AC/DC adaptor
Sensor
Power line
Signal Line
CH1
CH2
CH3
CH4
Alarm out
6
