background image

Safety Information 

Specifications 

Machine Diagram 

Assembly Instructions 

Control Panel Diagram 

Control Panel Operation 

Warranty Information 

Quick Reference 

02 

03 

04 

04-05 

06 

06-07 

07 

07-08 

BEFORE USE… 

• Check the exercise speed before operating to ensure it’s at a safe and comfortable level for you. 
• Hold the safety handle before beginning the program to ensure your balance. 
• Keep a recommended gap of 30cm between your feet in the initial stages. 
• Prior to cleaning the machine, make sure the machine is off and the power cord is unplugged. 

-

NOTE:

 Using corrosive cleaner is prohibited. 

Do not

 use benzene or thinner to clean the machine. 

Do not

 spray insecticide on the 

machine. 

• When the machine is not in use, turn off the power and unplug the power cord, to both save energy and reduce the risk of fire. 
• When the machine is not in use, use a cover to protect the vibration plate from accumulating dust. 

USE CAUTION 

IMMEDIATELY DISCONTINUE USE IF YOU HAVE ANY DISCOMFORTS AND DO NOT RESUME USE UNTIL CONSULTING A 
PHYSICIAN.

 

Do not

 coil the power cords, as this may cause the machine to malfunction and could damage the power cords. 

Do not

 exercise in the same pose for more than ten (10) minutes, as this may result in muscle cramping. 

Do not

 operate the machine with more than one person at a time, as this may result in injury or machine damage. 

Do not

 operate the machine with wet hands, as this could cause an electric shock. 

Do not

 reduce or use force to relocate the product, as this may cause damage to the machine. 

Do not

 store the vibration plate near heat or open flame; in direct sunlight or high temperatures for a prolonged period of time; or in 

humidity. 

Do not

 use any kind of sharp tools (i.e. knife) on the vibration plate.  

Do not

 use the machine 30 minutes before and after eating a meal. 

Do not

 use the machine for any purpose other than exercise. 

Do not 

use the machine in wet areas (i.e. bathroom), as this may result in electrical shock. 

Do not

 use the vibration plate for any purpose other than its intended use, as described in this manual. 

 of 

2 8

Table of Contents

Safety Information

Summary of Contents for VBX 3500









Reviews: