VBrick dme, Admin Manual

Page: 109 / 219

System Configuration
DME Admin Guide 97
SSL Certificates

To access the SSL Certificates fields:
1. Navigate to
System Configuration
>
SSL Certificate.
When using SSL, a server certificate is required for secure communications. DME Supports
two types of SSL security certificates:
Self-Signed
and
Authority Generated
(e.g. Verisign).
Organizational security requirements determine which to use. Both are supported by the
DME. Notice that the
Currently Installed Certificates
are displayed at the top of the form.
In the case of self-signed certificates, select the
Generate and Install a Self-Signed CERT
button and the certificate is simply generated and installed by the DME.
Restore Configuration • Restore from a file – This allows you to restore a previously
saved configuration settings file. This operation will not restore
the FTP user name and password. After a "restore
configuration" you will need to manually change this (if desired)
using the Username and Password page. Further, all
NETWORK and CERTIFICATE settings will remain as
previously set before the restore – please review and adjust
accordingly. After any restore, it is good practice to review and
possibly change your Username and Passwords, configuration
settings, and streams.
• Restore from a snapshot point – Restores from the snapshot
point created with a “Save Configuration.” Note: This option
only works if there is a previously saved snapshot created with a
“Save Configuration.” Also, similarly to Restoring from a file, all
NETWORK and CERTIFICATE settings will remain as
previously set before the restore – please review and adjust
accordingly. After any restore, it is good practice to review and
possibly change your Username and Passwords, configuration
settings, and streams.
Field/Button Description