VBrick Systems 7000 Series Admin Manual Download Page 19

Page: 19 / 85

General

System Identification

The Name, Location, and Contact fields are used to identify the appliance. They

are not

changed when you click

Default

. (They

are

changed when you reset to the defaults on the

Manage Configuration page.)

Secondary Server IP Address Secondary host name (VBrick Host Name or DNS Host

Name) or IP address of valid SNTP server providing time
synchronization. A blank field indicates the server address
will be acquired via the DHCP server only if the

Network

DHCP

field above is checked.

System Description Read-only. Company name, appliance model number, and serial

number.

System Name

User-defined. System name, for example Biology Dept.

System Location

User-defined. System location, for example West Campus.

System Contact

User-defined. Contact person, for example Jane Doe.

Summary of Contents for 7000 Series






















































































Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands

VBrick Systems 7000 Series, Admin Manual

Search results

Summary of Contents for 7000 Series

Reviews:

Related manuals for 7000 Series

Brands by name

Popular brands