14
15
6. Make coffee: Temperature Adjustment
The temperature controls by sensing the thermostat in the boiler. Accessing the thermostat adjustment
is simple. Simply remove the Cup Warming Tray and beneath that you will see a perforated panel with a
black plug. Remove the plug and fit a screwdriver, then turn to adjust the boiler temperature:
CLOCKWISE RAISES THE TEMPERATURE
COUNTERCLOCKWISE LOWERS THE TEMPERATURE
IMPORTANT
: the brew pressure gauge displays useful details only during the brew cycle, giving no
further information about brewing temperature. The only way to know brewing temperature is to measure
water coming our of the group through a thermometer ( even a digital one) sold by your retailer.
7. Make steam
To make steam you have to select the relevant function by turning the Steam Switch to its ON position:
when the
Steam Activity Lamp
is on, it means you have well selected this function.
Once this function is selected, the heating element brings the boiler water temperature up to 100 ° C,
turning water into steam, ready to be brewed by opening the
Water/Steam tap
.
WARNING: steam function doesn’t charge water in the boiler, so the long term selection of the
steam switch makes water turn into steam. In this case the heating element remains out of the
water, thus overheating itself. The safety circuit will then intervene taking electrical tension off the
whole machine (stand-by phase).
The machine should automatically reactivate: in case the stand-by phase is too long, you should contact
our after sales service.
8. Make water
To brew water you have to select the relevant function by turning the
Water Switch
to its ON position:
when the
Water Activity Light
is on, it means you have well selected this function.
Once this function is selected, the heating element brings water to the right temperature, ready to be
brewed by opening the
Water/Steam tap
.
WARNING: the long term selection of the Water Switch could turn water into steam, making
the heating element remain out of water and thus overheating itself. The safety circuit will then
intervene taking electrical tension off the whole machine (stand-by phase).
The machine should automatically reactivate: in case the stand-by phase is too long, you should contact
our after sales service .
