PO-1581
8
DISPLAY
Electricity
Mode display
Switch
OPERATING PRINCIPLES
OPERATION
•
Hold the Switch button for 2 seconds to turn the E-Scooter OFF or ON.
•
Short press the Switch button to turn on front light.
•
Double short press the Switch button to toggle between power saving mode and normal mode.
In power saving mode the max speed of the E-Scooter is 18 km/h.
When in power saving mode the bottom two lights are green. When in normal mode the bottom two lights are white.
HOW TO RIDE YOUR E-SCOOTER
•
Switch on the E-Scooter.
•
Stand with one foot on the footboard.
•
To start you must manually start riding before the E-Scooter will accelerate. Use one foot to push the E-Scooter
forward and press down the accelerator lever.
•
The accelerator lever is located on the right handlebar, press the lever down to accelerate and release
to decelerate.
•
The hand operated front brake is located on the left handle bar, press the lever down progressively to decelerate.
NOTE:
You need to manually push the E-Scooter forward before you can start accelerating.
PLEASE READ THE FOLLOWING INSTRUCTIONS CARFULLY
Step 1:
Getting started – Take your E-Scooter out of the box and place it flat on the floor.
Step 2:
Charging your E-Scooter – Make sure the E-Scooter is fully charged before your initial use. For charging
instructions, please follow details under the battery and charging specifications.
Step 3:
Wear all proper safety gear, including but not limited to a helmet, knee pads, elbow pads and wrist guards.
WEIGHT AND SPEED LIMITATIONS
WARNING:
Speed and weight limits are set for your own safety. Please do not exceed the limits listed in
the user manual.
WEIGHT RESTRICTIONS
Maximum weight: 100 kg
GETTING STARTED / INSTRUCTIONS / WEIGHT AND SPEED LIMITATIONS
Summary of Contents for PO-1581
Page 1: ...USER GUIDE PO 1581 E SCOOTER...
Page 2: ...Danish manual can be found at www envivo nu dk...
Page 12: ......