16. In Fig.13 “Change image”.
And click “ take photo ” to
take a photo.
13. Click the “Functions”, You
can choose “Test”, “Auto”,
or “Custom Setting”.
Select “Test” in Manual
override and adjust
“Detection Distance” ,
“Brightness” and “CCT
change” as desired.
Then click “Save”.
14. Select “Auto” in Manual
override and adjust “Motion
Delay Time”, “Detection
Distance” , “Brightness” and
“CCT change” as desired.
Then click “Save”.
15. Select “Custom Settings” in Manual Override for Customize Early Evening Mode setting
and choose option between “Duration” or “Clock Time (End Time)” to set the continuous
bright light illumination duration. Within “Duration”, you may set from 0 to 12 hours for
continuous bright light once lamp is activated at night. In “Clock Time (End Time)”, is the
time you set to deactivate the continuous bright light according to the actual hour in the
mobile device after the lamp is activated. Both option settings will return to motion-sensor
operation after the continuous bright light is deactivate. 9:00 P.M. is the default in “Clock
Time (End Time)”.
Note: "Duration" setting will only work once per setting,
it automatically go into
“Clock Time (End Time) on the next day. Also if you do not click save for either
option, then the settings will follow according to the switch control on the actual
lamp.
a. Android: Click “ ” to grasp a your desired view.
IOS: Click “ ” to grasp a your desired view.
b. Android:Click “ ” to take a photo.
The iOS system does not have this step.
c. Android: Adjust the photo to trim the photo's
"desired size. Then click “ ” .
IOS: Click“Done” to take a photo.
13
16
Cancel
14
15
USER GUIDE (continued)
Page 11 / 17
211229