Wrap solution tube (A) around hose (B). Ensure that
the solution tube is wrapped loosely enough to allow
the solution to flow freely through the tube (Fig.5/3).
After wrapping the tube around the hose, affix solution
tube (A) to hose (B) using clips provided (C) to hold it
in place (Fig.5/4).
Push end of solution tube onto connective valve
on the wash head/upholstery tool (Fig.5/5).
Plug in machine to power supply.
Press the red button to turn on the power.
Press the green button to activate the pump.
On the Fibreflow wash head ensure that the rocker
switch (A) is towards the back of the head to allow
water to flow through the head (Fig.6/1).
In order to help suck up excess water, the rocker switch
(A) can be pushed to the front position on the Fibreflow
wash head. This will prevent water flow, allowing
excess water to be removed (Fig.6/2).
In order to wash upholstery, including stairs and soft
furnishings, simply detach Fibreflow wash head from
wand and solution tube and replace with wash tool as
shown (Fig.6/3).
NOTE: Do not store cleaner with solution in clean
water tank or dirty water in dirty water tank. Mineral
deposits and mildew can form which will affect the
performance of the cleaner.
NOTE: For extra extraction, detach wash tool
head from wand and solution tube and attach the
upholstery tool to the end of the wand.
Fig.5/4
A
B
C
Fig.5/5
A
Fig.6/2
Fig.6/3
Fig.5/3
A
B
6
Preparing the carpet
Usage
Fig.6/1
A
