Assembling your steamer
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Microfi bre pads
VTHSP & VTHSP4
*
To purchase consumables and accessories, please visit
vax.com.au
CAUTION:
• The steamer and accessories get very hot during use, always allow them to cool down before handling.
• Always unplug and switch off the steamer when assembling or disassembling.
• Always switch off the steamer before emptying the water tank or changing the cloths/accessories.
IMPORTANT:
• Please refer to fl oor manufacturer’s care recommendations before use and test the steamer on a hidden area
of fl ooring to begin with. Check with fl ooring manufacturer for suitability on sealed fl oors prior to use.
• Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use.
• When using the steamer, basic safety precautions should always be observed.
• Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam
jet or fl oorhead from a short distance (there is a risk of scalding).
• The steamer is equipped with a thermostat and a thermal fuse. If for any reason the steamer overheats it will
switch off . If this happens turn off and unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.
• Don’t use hot or boiling water to fi ll or clean water tank.
Push the main body down into the
fl oorhead until it clicks into place.
Stand the steamer upright by
pushing the main body forward
to lock into position.
Push the handle into main body
until it clicks into place. The collar
should be gripped when connecting
or releasing the handle.
Summary of Contents for VX69
Page 18: ...Notes...
Page 19: ...Notes...