Taking care of your machine
Taking care of your machine
Cleaning the pre-motor filter
NOTE:
Check filters
for cleanliness every
time you empty the
dirt container. Clean
where necessary.
Replace filters when
discoloured and/or
damaged (frequency
will depend on level
of use).
Tap excess dirt from the filter. Rinse under a tap and leave to dry at least for 24 hours
before replacing in vacuum cleaner.
TA
P
4
MAX
40˚C
MAX
40˚C
5
24hr
6
1
2
3
Hold the dirt container and
twist the lid anti-clockwise.
Lift the lid to reveal the
pre-motor filter.
Lift out the pre-motor filter.
5
Cleaning the shroud
1
2
3
TAP
6
Lift the lid to reveal the
pre-motor filter.
Lift out the pre-motor filter.
Hold the dirt container and
twist the lid anti-clockwise.
4
Remove the inner separator
from the container.
Remove the cap from the inner
separator.
Dislodge any excess dirt
by gently tapping the inner
separator upside down
above a bin.
