Taking care of your machine
Press the water tank
release button and lift the
water tank by the handle
Emptying the water tank
Pull the tab on the water
tank to open
Hold corner of pad down with
foot and lift steam mop to
peel away
All cleaning pads are machine
washable (Max 40’C) allow to
fully dry before use
Removing cleaning pads
Taking care of your machine
Max 40°C
IMPORTANT:
Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks
Don’t leave water or detergent in the tanks between uses, as this can effect the machines performance.
The water/detergent tanks need to be emptied and rinsed after each use.
Empty any excess water
over the sink
Rinse water tank with water and
replace water tank tab, push firmly
to close before replacing back onto
the machine
Push both detergent tank
release buttons and lift
to remove
Emptying the detergent tank
Twist detergent tank cap
anti-clockwise and lift
to remove
Empty any excess
detergent over the sink
Rinse detergent tank with water
and replace detergent tank cap,
turn clockwise to tighten before
replacing back onto the machine
